Gigaprobe hooked up to the Agilent 86100 TDR system
Connect the Gigaprobe to the 86100 oscilloscope mainframe with the 54754A TDR/TDT plug-in module with eiither the High-speed receiver channel:86118A (~75 GHz, remote head)or 86117A (50 GHz, non remote).
This configuration provides a 100 ohm or 50 ohm TDR measurement system.
NEW SLOT Gigaprobes(tm) Calibrator
Unique calibration capabilities of the 86100 remove systematic measurement errors from cabling, connectors, and probes so you see only the properties of the test device. This calibration process is similar to calibrations of network analyzers... Using the Gigaprobes(tm) SLOT calibrator, just place a short circuit and load at the reference plane of the test device for optimum TDR accuracy performance.
GigaProbe hooked up to the Agilent and 4022TDRT system
Hook up the GigaProbes™ in either the 100 or 50 ohm configuration to the PSPL 4022TDRT cabled to the 54754A TDR/TDT module and Increase the two-event resolution impedance precision of the TDR through pulse enhancement. See sub-millimeter two-event resolution and accurately measure impedance for ultra-fast edge speeds with the 4000 pulse module accessories from Picosecond Pulse Labs (www.Picosecond.com)
Accurately characterize differential circuitry
Highest fidelity and symmetry dual-TDR outputs yield precision differential and common mode results in a single setup
Gain insight and improved modeling through frequency domain S-parameters
Copyright 2006 Brian Shumaker DVT Solutions 650 593-7083