Probing Solutions, inc. Probe Stations, Manipulators and PCB Fixturing
DVT Solutions, LLCrepresents Probing Solutions, Inc. a manufactures of high quality low cost probe station, manipulators and PCB fixtures to be used with the GigaProbes(tm), Pico Probes/Cascade probes or any active probe from Tektronix, Agilent or LeCroy. Probing and fixturing is necessary as it allows the user to probe while freeing up the Engineer to operate the TDR or VNA equipment and SI software. A desk top fixture for vertical and horizontal probing is also available (see pictures below).
Slide down this page for a tour of Probing Fixtures, FA and SI probe stations from Probing Solutions Inc. for a complete system solutions for Signal Integrity and Failure Analysis applications.
Bench Top Fixtures and Manipulators
Install PCB in Vertical PCB Fixture. Use GP35 and GPMMA to hold and position Probe
Vertial Fixture can be adjusted to accomodate up to 19x19" PCB. Probe both sides of board for TDR/TDT measurements
Package Failure Analysis and Small/Medium PCB Probing
Take a tour of the 1120-ZLS-V0 probe station by clicking on each of the pictures below. Each picture provides an enlarged picture with a detail description. At that point, you can choose to see a slide show or close the picture and click on the next picture to see a detailed description.
After you review all the pictures below you can down load the 1120-ZLS-V0 data sheet and the Probe manipulator selection chart to select which manipulator to use with your probe station.If you have any questions on putting a system together or would like a quote send us an email and your contact information by clicking this e-mail link.
Click on any picture below to get a larger view and a detail description.
The 2020HV Signal Integrity probe station (show above) from Probing Solutions can be configured to probe Vertical and Horizontal printed circuit boards. The Vertical Fixture allow for probing fount and back side of backplanes to include probing daughter boards, providing the capability to TDR the backplane via, connector and daughter board interconnect path.Active probes can be mounted on the PWAVE micropositioners to perform functional SI on complete systems.Horizontal fixturing is also available.
GigaProbes(tm) TDR Probing Backplane
GigaProbes(tm) viewd by 2020HV 180x CCD camera
The flexible snake light of the 2020HV SI probe station casts light on probing area and viewed on the system's 180x CCD cameras mounted on platforms as seen in this picture above.
Copyright 2006 Brian Shumaker DVT Solutions 650 743-5669